Epson Powerlite Pro CINEMA 810 HQV projector lamp
The Epson Powerlite Pro CINEMA 810 HQV takes lamp ELPLP39, a 170 W lamp rated for 3,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Epson and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Epson Powerlite Pro CINEMA 810 HQV take?
The Epson Powerlite Pro CINEMA 810 HQV uses ELPLP39, also sold as V11H244020, V11H245020MB, V11H289020, V13H010L39.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Powerlite Pro CINEMA 810 HQV lamp last?
ELPLP39 is rated for 3,000 hours at 170 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Epson projectors?
Yes. The same lamp also fits the Epson ELPHC100, the Epson ELPHC200, the Epson EMP-TW700, the Epson EMP-TW720, the Epson EMP-TW980, the Epson EMP-TW1000 and other Epson models listed on this page.