Digital Projection iVISION SX PLUS projector lamp
The Digital Projection iVISION SX PLUS takes lamp 03-000710-01P / 400-0003-00, a 250 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Digital and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Digital Projection iVISION SX PLUS take?
The Digital Projection iVISION SX PLUS uses 03-000710-01P / 400-0003-00, also sold as Perception 001-821, Perception 03-000710-01P, Perception 400-0003-00, Perception TDP-F1, Projection 001-821, Projection 03-000710-01P.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Projection iVISION SX PLUS lamp last?
03-000710-01P is rated for 2,000 hours at 250 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Digital projectors?
Yes. The same lamp also fits the Digital Projection 104-642, the Digital Projection 313-400-0003-00, the Digital Projection F1LAMP, the Digital Projection iVISION HD, the Digital Projection iVISION HD7, the Digital Projection iVISION HD-X and other Digital models listed on this page.