Digital Projection iVISION HD projector lamp
The Digital Projection iVISION HD takes lamp 03-000710-01P / 400-0003-00, a 250 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. The same lamp is also sold under 16 other part numbers, all listed below. It fits 9 Digital models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Digital Projection iVISION HD.
| Code | Used by |
|---|---|
03-000710-01P | Digital original part number |
400-0003-00 | Digital original part number |
Perception 001-821 | Equivalent code |
Perception 03-000710-01P | Equivalent code |
Perception 400-0003-00 | Equivalent code |
Perception TDP-F1 | Equivalent code |
Projection 001-821 | Equivalent code |
Projection 03-000710-01P | Equivalent code |
Projection 400-0003-00 | Equivalent code |
Projection TDP-F1 | Equivalent code |
Systems 1500-0130-00 | Equivalent code |
Systems 28-685 | Equivalent code |
Systems RUPA-003600 | Equivalent code |
Systems UP-280DC | Equivalent code |
Design 001-821 | Equivalent code |
Design 03-000710-01P | Equivalent code |
Design 400-0003-00 | Equivalent code |
Design TDP-F1 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Digital and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the Projection iVISION HD, the same lamp is the correct part.
Which lamp does the Digital Projection iVISION HD take?
The Digital Projection iVISION HD uses 03-000710-01P / 400-0003-00, also sold as Perception 001-821, Perception 03-000710-01P, Perception 400-0003-00, Perception TDP-F1, Projection 001-821, Projection 03-000710-01P.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Projection iVISION HD lamp last?
03-000710-01P is rated for 2,000 hours at 250 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Digital projectors?
Yes. The same lamp also fits the Digital Projection 104-642, the Digital Projection 313-400-0003-00, the Digital Projection F1LAMP, the Digital Projection iVISION HD7, the Digital Projection iVISION HD-X, the Digital Projection iVISION SX and other Digital models listed on this page.