PHOTO
VS-PJ675-LAMP bare projector lamp
Fits 2 projector models from Viewsonic.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Viewsonic's PJ675 and PJ682 share the same lamp, sold here in bare form as VS-PJ675-LAMP. Choosing the bare bulb rather than a full module means your existing lamp cage stays in the projector, and only the failed bulb itself is renewed, which suits either model when the housing is still intact.
There are no further alternative codes recorded for this bulb beyond VS-PJ675-LAMP itself, so that single reference is what to look for when ordering or comparing against your old lamp's markings. Fitting it means opening the current cage, transferring the bulb across, and checking the electrical contacts seat correctly, since a loose connection is a common cause of lamps failing to strike after a bare-bulb swap.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-11715
- Compatibility — 2 projector models
Common questions
Does VS-PJ675-LAMP fit both the PJ675 and PJ682?
Yes, Viewsonic used the same lamp in both models, so this bare bulb covers either projector without any changes being required at all on your part.
Is there a module version available instead of the bare bulb?
A separate listing supplies this lamp as a complete module with housing, which is worth choosing instead if your existing cage is damaged rather than just the bulb.
Are there other part numbers I should look for besides VS-PJ675-LAMP?
No further alternative codes are recorded for this lamp, so VS-PJ675-LAMP is the single reference to check against your old bulb or the projector manual.
What causes a bare bulb to fail to strike after fitting?
A loose or misaligned electrical contact at the base of the bulb is a common cause. Reseating the bulb fully in its socket usually resolves this.
Why choose a bare bulb over the module version for the PJ675?
If your existing housing, reflector and connector are undamaged, a bare bulb is the lower-cost option, since only the light source itself needs to be replaced.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Does VS-PJ675-LAMP fit both the PJ675 and PJ682?
Yes, Viewsonic used the same lamp in both models, so this bare bulb covers either projector without any changes being required at all on your part.
Is there a module version available instead of the bare bulb?
A separate listing supplies this lamp as a complete module with housing, which is worth choosing instead if your existing cage is damaged rather than just the bulb.
Are there other part numbers I should look for besides VS-PJ675-LAMP?
No further alternative codes are recorded for this lamp, so VS-PJ675-LAMP is the single reference to check against your old bulb or the projector manual.
What causes a bare bulb to fail to strike after fitting?
A loose or misaligned electrical contact at the base of the bulb is a common cause. Reseating the bulb fully in its socket usually resolves this.
Why choose a bare bulb over the module version for the PJ675?
If your existing housing, reflector and connector are undamaged, a bare bulb is the lower-cost option, since only the light source itself needs to be replaced.
Other Viewsonic lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
