PHOTO
VLT-XD700LP bare projector lamp
Fits 16 projector models from Mitsubishi.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
For projectors where the existing housing is undamaged, this bare version of VLT-XD700LP is the more economical choice: 280 watts, 3000 hours, for the Mitsubishi XD700U, WD720U, FD730U and UD740U range. It avoids paying for a new cage you do not need.
Fitting this bare lamp means opening the housing that already sits in your XD700 or FD730 and swapping the bulb inside it, rather than replacing the whole assembly. If the housing itself is cracked or the connector no longer seats properly, the module version of VLT-XD700LP is the better choice.
At a glance
- Wattage — 280 W
- Rated life — 3,000 hours
- Type — Bare Projector Lamp
- SKU — LA-09474
- Compatibility — 16 projector models
Common questions
How do I safely remove the old bulb from my WD720U's housing?
Let the projector cool fully, then release the housing's retaining clips or screws as directed in your manual, and lift the old bulb out by its base rather than the glass envelope.
Is it worth buying the bare bulb to save money on my GX-845, or should I get the module?
If your GX-845's housing shows no cracks and the connector still seats firmly, the bare bulb is the cheaper and equally effective option. Damaged housings are better served by the full module.
Does the UD740U's bare bulb differ from the one used in the FD730U?
No, both take the identical bare VLT-XD700LP bulb, despite sitting at different points in Mitsubishi's resolution lineup for this projector family and carrying different model names.
What should I avoid touching when fitting a bare bulb like this one?
Avoid contact with the glass envelope itself; handle the lamp by its base or ceramic housing edge, since oils from skin can shorten lamp life once the bulb heats up.
Is there a risk of buying the wrong version if my old lamp was a module?
Yes, check whether your old lamp had its own housing attached or was a loose bulb inside your projector's permanent housing. If it came out as a bulb alone, this bare version is the correct match.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
How do I safely remove the old bulb from my WD720U's housing?
Let the projector cool fully, then release the housing's retaining clips or screws as directed in your manual, and lift the old bulb out by its base rather than the glass envelope.
Is it worth buying the bare bulb to save money on my GX-845, or should I get the module?
If your GX-845's housing shows no cracks and the connector still seats firmly, the bare bulb is the cheaper and equally effective option. Damaged housings are better served by the full module.
Does the UD740U's bare bulb differ from the one used in the FD730U?
No, both take the identical bare VLT-XD700LP bulb, despite sitting at different points in Mitsubishi's resolution lineup for this projector family and carrying different model names.
What should I avoid touching when fitting a bare bulb like this one?
Avoid contact with the glass envelope itself; handle the lamp by its base or ceramic housing edge, since oils from skin can shorten lamp life once the bulb heats up.
Is there a risk of buying the wrong version if my old lamp was a module?
Yes, check whether your old lamp had its own housing attached or was a loose bulb inside your projector's permanent housing. If it came out as a bulb alone, this bare version is the correct match.
Other Mitsubishi lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
