PHOTO
TLPLW3 bare projector lamp
Fits 10 projector models from Toshiba.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Ten Toshiba projectors are built around the TLPLW3 bulb, covering the TDP-T80, T90, T90J, T91, T91J, T98, T98J, TW90, TW90J and TW91. It is supplied bare, meaning it needs fitting into your current housing rather than arriving as a full assembly, and the same part also appears under the code 75016681.
With ten compatible projector models, it is worth double-checking the code printed on your existing lamp against TLPLW3 or 75016681 rather than relying on the projector name alone, since T80, T90, T91 and T98 variants look similar from the outside. Once confirmed, transfer the bulb into your existing housing during fitting.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-10490
- Compatibility — 10 projector models
Common questions
Do the T90, T91 and T98 all take the same lamp?
Yes, along with the TDP-T80 and TW90 ranges, all ten listed models are specified for the identical TLPLW3 bulb, so there is no variation in part number between them.
Is 75016681 a separate lamp from TLPLW3?
No, 75016681 is an alternative code Toshiba has used for this exact bulb, so a listing under either number describes the same product across all ten compatible projector models.
How do I know if my housing can be reused?
Inspect it for cracked plastic, a loose bulb socket or scorch marks around the connector. A sound housing can be reused with this bare bulb; a damaged one should be replaced as a full module instead.
What tools are usually needed to swap the bulb into the housing?
Most Toshiba housings in this range use small screws or spring clips to hold the bulb, so a small screwdriver is typically all that is required.
How can I tell this lamp is wearing out?
Watch for the picture dimming over time, colours looking washed out, or the projector taking longer than usual to reach full brightness after it is switched on.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Do the T90, T91 and T98 all take the same lamp?
Yes, along with the TDP-T80 and TW90 ranges, all ten listed models are specified for the identical TLPLW3 bulb, so there is no variation in part number between them.
Is 75016681 a separate lamp from TLPLW3?
No, 75016681 is an alternative code Toshiba has used for this exact bulb, so a listing under either number describes the same product across all ten compatible projector models.
How do I know if my housing can be reused?
Inspect it for cracked plastic, a loose bulb socket or scorch marks around the connector. A sound housing can be reused with this bare bulb; a damaged one should be replaced as a full module instead.
What tools are usually needed to swap the bulb into the housing?
Most Toshiba housings in this range use small screws or spring clips to hold the bulb, so a small screwdriver is typically all that is required.
How can I tell this lamp is wearing out?
Watch for the picture dimming over time, colours looking washed out, or the projector taking longer than usual to reach full brightness after it is switched on.
Other Toshiba lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
