PHOTO
T288-LAMP bare projector lamp
Fits 5 projector models from Lenovo.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
The same code, T288-LAMP, also covers a bare-bulb option for the T266, T285, T288, T290 and T501ST, sold here without a housing. It is designed to be transferred into the cage already fitted inside whichever of these five Lenovo projectors you own.
Choosing bare over the module makes sense if the housing currently inside your projector is undamaged, since you are paying only for the bulb itself. Whichever of the five compatible models you have, T266 through to T501ST, the code T288-LAMP applies equally.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-11690
- Compatibility — 5 projector models
Common questions
Which is cheaper, this bare bulb or the T288-LAMP module?
The bare bulb is generally the lower-cost option since it does not include a new housing. It suits owners whose existing housing is still in good condition rather than showing wear.
Does this bare bulb fit all five listed Lenovo models equally?
Yes, the T266, T285, T288, T290 and T501ST all share the same lamp, so this bare T288-LAMP bulb is correct for any of the five without needing a model-specific version.
What condition should my existing housing be in before fitting this bulb?
It should be free of cracks, with straight, undamaged connector pins and no scorch marks around the socket. A housing in poor condition can shorten the life of an otherwise good replacement bulb.
How do I remove the old bulb from a T290 or similar model?
Power down and unplug the projector, allow it to cool fully, then open the lamp compartment, lift out the old bulb from its housing and fit the replacement in the same orientation.
Is a lamp timer reset needed after fitting this bare bulb?
On most projectors in this range, yes. Look in the setup or maintenance menu for a lamp-hours reset option once the new bulb is installed, so old warnings stop appearing.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Which is cheaper, this bare bulb or the T288-LAMP module?
The bare bulb is generally the lower-cost option since it does not include a new housing. It suits owners whose existing housing is still in good condition rather than showing wear.
Does this bare bulb fit all five listed Lenovo models equally?
Yes, the T266, T285, T288, T290 and T501ST all share the same lamp, so this bare T288-LAMP bulb is correct for any of the five without needing a model-specific version.
What condition should my existing housing be in before fitting this bulb?
It should be free of cracks, with straight, undamaged connector pins and no scorch marks around the socket. A housing in poor condition can shorten the life of an otherwise good replacement bulb.
How do I remove the old bulb from a T290 or similar model?
Power down and unplug the projector, allow it to cool fully, then open the lamp compartment, lift out the old bulb from its housing and fit the replacement in the same orientation.
Is a lamp timer reset needed after fitting this bare bulb?
On most projectors in this range, yes. Look in the setup or maintenance menu for a lamp-hours reset option once the new bulb is installed, so old warnings stop appearing.
Other Lenovo lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
