PHOTO
SP-LAMP-081 projector lamp with module
Fits 3 projector models from Infocus.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
SP-LAMP-081 is the lamp Infocus specifies for the IN5142, IN5144 and IN5145, supplied here as a complete module with housing and cage. We do not have a wattage or rated-hours figure on file for this lamp, so neither is stated on this listing.
With three projector models sharing one part number, ordering is straightforward provided your model badge reads IN5142, IN5144 or IN5145. As a module, this lamp is fitted as a single assembled unit, so there is nothing to salvage from your existing housing before installing it.
At a glance
- Type — Projector Lamp with Module
- SKU — LA-09265
- Compatibility — 3 projector models
Common questions
Which projectors take the SP-LAMP-081 lamp?
The Infocus IN5142, IN5144 and IN5145 all use this lamp, listed under a single part number covering all three models, so one module is correct for any of them.
Why is the SP-LAMP-081 module listed without a power figure?
No wattage figure appears in the documentation we hold for SP-LAMP-081, so we leave the field blank rather than publish an estimate that could turn out to be wrong.
Is this the housed or bare version of SP-LAMP-081?
This listing is the complete module, with the bulb pre-fitted inside a new housing and cage, ready to install as a single piece into your projector's lamp bay.
How do I remove the old lamp module from an IN5144?
Unplug the projector and allow it to cool, then open the lamp access panel, undo the retaining screws holding the module in place, and slide it out before fitting the replacement the same way in reverse.
Are there other part numbers for this lamp I should check?
No, SP-LAMP-081 is the only code on our records for the IN5142, IN5144 and IN5145 lamp, so there is nothing else to cross-reference before ordering.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Which projectors take the SP-LAMP-081 lamp?
The Infocus IN5142, IN5144 and IN5145 all use this lamp, listed under a single part number covering all three models, so one module is correct for any of them.
Why is the SP-LAMP-081 module listed without a power figure?
No wattage figure appears in the documentation we hold for SP-LAMP-081, so we leave the field blank rather than publish an estimate that could turn out to be wrong.
Is this the housed or bare version of SP-LAMP-081?
This listing is the complete module, with the bulb pre-fitted inside a new housing and cage, ready to install as a single piece into your projector's lamp bay.
How do I remove the old lamp module from an IN5144?
Unplug the projector and allow it to cool, then open the lamp access panel, undo the retaining screws holding the module in place, and slide it out before fitting the replacement the same way in reverse.
Are there other part numbers for this lamp I should check?
No, SP-LAMP-081 is the only code on our records for the IN5142, IN5144 and IN5145 lamp, so there is nothing else to cross-reference before ordering.
Other Infocus lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
