PHOTO
SP.8MW01GC01 projector lamp with module
Fits 2 projector models from Optoma.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Optoma sold the 3DS1 and 3DW1 as a dedicated pairing for 3D projection, and both run on this SP.8MW01GC01 lamp module. This version includes the full housing, so the replacement is a straight swap of the whole assembly rather than handling a loose bulb on its own.
The 3DS1 and 3DW1 are less common than Optoma's general-purpose ranges, so this lamp is worth checking carefully against your projector's exact model name before ordering. As a module rather than a bare bulb, no separate housing or cage transfer is needed once the old unit is removed.
At a glance
- Type — Projector Lamp with Module
- SKU — LA-09656
- Compatibility — 2 projector models
Common questions
What are the Optoma 3DS1 and 3DW1?
They are a pair of projectors Optoma built for dedicated 3D projection, differing mainly in screen size or throw distance. Both share the SP.8MW01GC01 lamp module, so one listing covers replacement for either model.
Is this lamp only sold as a full module?
This particular listing is a lamp with module, meaning the bulb comes already fitted into its housing. A separate bare-bulb version of the same lamp is also listed if you only need the bulb.
How do I know if my projector is a 3DS1 or 3DW1?
Check the model name on the projector's case or rear panel, or the on-screen information menu. Both models take the identical SP.8MW01GC01 module, so the distinction only matters for confirming you have the right unit.
Does this lamp need a timer reset after installation?
Most Optoma projectors, including the 3DS1 and 3DW1, prompt for a lamp hours reset from the on-screen menu once a new module is detected, which keeps the usage counter accurate going forward.
Is there a bare-bulb version if my housing is fine?
Yes, SP.8MW01GC01 is also available as a bare bulb for reuse in an undamaged housing, which costs less than the full module if your existing cage and connector are in good condition.
This is a complete module — bulb already seated in its housing, so it drops straight in.
What are the Optoma 3DS1 and 3DW1?
They are a pair of projectors Optoma built for dedicated 3D projection, differing mainly in screen size or throw distance. Both share the SP.8MW01GC01 lamp module, so one listing covers replacement for either model.
Is this lamp only sold as a full module?
This particular listing is a lamp with module, meaning the bulb comes already fitted into its housing. A separate bare-bulb version of the same lamp is also listed if you only need the bulb.
How do I know if my projector is a 3DS1 or 3DW1?
Check the model name on the projector's case or rear panel, or the on-screen information menu. Both models take the identical SP.8MW01GC01 module, so the distinction only matters for confirming you have the right unit.
Does this lamp need a timer reset after installation?
Most Optoma projectors, including the 3DS1 and 3DW1, prompt for a lamp hours reset from the on-screen menu once a new module is detected, which keeps the usage counter accurate going forward.
Is there a bare-bulb version if my housing is fine?
Yes, SP.8MW01GC01 is also available as a bare bulb for reuse in an undamaged housing, which costs less than the full module if your existing cage and connector are in good condition.
Other Optoma lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
