PHOTO
RLC-032 Projector Lamp with Module
Fits 1 projector model from Viewsonic.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
This RLC-032 module comes housed and ready to fit, rated at 160 watts with a 2000 hour service life for the Viewsonic PRO8100. The housing, reflector and connector are assembled around the bulb, so the complete cage is exchanged in one step rather than transferring a bare bulb.
RLC-032 has no alternative part numbers, so confirming your projector is a PRO8100 is the only check needed. The 2000 hour rating is shorter than some newer RLC lamps in our range, reflecting the PRO8100's age, so the module is worth choosing if your existing housing has already seen heavy use.
At a glance
- Wattage — 160 W
- Rated life — 2,000 hours
- Type — Projector Lamp with Module
- SKU — LA-10633
- Compatibility — 1 projector models
Common questions
Why is this lamp rated for fewer hours than the RLC-059 or RLC-063?
Each RLC code carries the rating Viewsonic set for that specific lamp and projector combination. The RLC-032's 2000 hour figure reflects the PRO8100's original specification rather than a general trend across our range.
Is the module worth the extra cost over the bare version for an older projector?
If the PRO8100's original housing has been in use for years, replacing it alongside the bulb avoids relying on a connector or reflector that may already be worn.
Does a 160 watt lamp still produce a bright enough image for most rooms?
160 watts is on the lower end of our range, so it suits smaller rooms or shorter throw distances better than very bright, large venues. Actual brightness also depends on the PRO8100's own optics.
What is the correct order of steps when fitting this module?
Unplug the projector, let it cool fully, remove the old lamp assembly, insert the new RLC-032 module, secure it, then reset the lamp counter through the on-screen menu.
Is RLC-032 sold under any other name or code?
No, RLC-032 is the only part number we have on record for this lamp, so there is no alternative code to check beyond confirming your projector is a PRO8100 before ordering.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Why is this lamp rated for fewer hours than the RLC-059 or RLC-063?
Each RLC code carries the rating Viewsonic set for that specific lamp and projector combination. The RLC-032's 2000 hour figure reflects the PRO8100's original specification rather than a general trend across our range.
Is the module worth the extra cost over the bare version for an older projector?
If the PRO8100's original housing has been in use for years, replacing it alongside the bulb avoids relying on a connector or reflector that may already be worn.
Does a 160 watt lamp still produce a bright enough image for most rooms?
160 watts is on the lower end of our range, so it suits smaller rooms or shorter throw distances better than very bright, large venues. Actual brightness also depends on the PRO8100's own optics.
What is the correct order of steps when fitting this module?
Unplug the projector, let it cool fully, remove the old lamp assembly, insert the new RLC-032 module, secure it, then reset the lamp counter through the on-screen menu.
Is RLC-032 sold under any other name or code?
No, RLC-032 is the only part number we have on record for this lamp, so there is no alternative code to check beyond confirming your projector is a PRO8100 before ordering.
Other Viewsonic lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
