PHOTO
R9832752 bare projector lamp
Fits 1 projector model from Barco.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
R9832752 is the bare bulb specified for the Barco RLM-W8, sold as the lamp alone rather than with a housing attached. It suits situations where the housing already fitted to the projector is undamaged and only the bulb inside it needs changing. A module version of the same lamp is listed separately for the RLM-W8 as well.
Before ordering, decide whether the RLM-W8 needs a bare bulb or a full module, since both options exist for this projector under related codes. R9832752 assumes the reflector and cage are being reused, so it is worth checking these are not cracked or clouded. Fitting is limited to removing the old bulb from its socket and seating the replacement in the same position.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-08206
- Compatibility — 1 projector models
Common questions
Is there a housed version of this lamp available too?
Yes, a complete module covering the same lamp position is listed separately for the Barco RLM-W8, in case the housing needs replacing rather than just the bulb.
Which projector is R9832752 designed for?
This code is specific to the Barco RLM-W8. Similarly named Barco models such as the RLM-W6 or RLM W12 use different lamp codes, so check yours carefully before ordering.
What is a reasonable point to consider replacing the bulb?
A dimmer or uneven picture, colour that has shifted, or a lamp warning on the RLM-W8 itself are the usual signals that R9832752 is due for replacement.
How should the old bulb be removed safely?
Power down the RLM-W8 and allow it to cool completely before opening the lamp compartment, then release the retaining clip and lift the bulb from its socket without touching the glass.
Do I need to reset anything on the projector once fitted?
Some Barco models track lamp hours and will prompt for this to be cleared through the menu system once a new bulb is detected. Check the RLM-W8 manual for the specific steps, since this varies by firmware version.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Is there a housed version of this lamp available too?
Yes, a complete module covering the same lamp position is listed separately for the Barco RLM-W8, in case the housing needs replacing rather than just the bulb.
Which projector is R9832752 designed for?
This code is specific to the Barco RLM-W8. Similarly named Barco models such as the RLM-W6 or RLM W12 use different lamp codes, so check yours carefully before ordering.
What is a reasonable point to consider replacing the bulb?
A dimmer or uneven picture, colour that has shifted, or a lamp warning on the RLM-W8 itself are the usual signals that R9832752 is due for replacement.
How should the old bulb be removed safely?
Power down the RLM-W8 and allow it to cool completely before opening the lamp compartment, then release the retaining clip and lift the bulb from its socket without touching the glass.
Do I need to reset anything on the projector once fitted?
Some Barco models track lamp hours and will prompt for this to be cleared through the menu system once a new bulb is detected. Check the RLM-W8 manual for the specific steps, since this varies by firmware version.
Other Barco lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
