PHOTO
LMP-RAC400 bare projector lamp
Fits 1 projector model from Acto.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
LMP-RAC400 is a bare bulb rated at 215 watts with a 4,000-hour lamp life, built for the Acto RAC400. Supplied without a housing, it is fitted into the lamp cage already installed in the RAC400 rather than arriving as a complete assembly.
We list this lamp under a single code, LMP-RAC400, matching the part number Acto assigns to the RAC400's bulb. With a 4,000-hour rating it runs longer between replacements than many bare bulbs in this range, though actual life still depends on how often the projector is used.
At a glance
- Wattage — 215 W
- Rated life — 4,000 hours
- Type — Bare Projector Lamp
- SKU — LA-08081
- Compatibility — 1 projector models
Common questions
Is LMP-RAC400 only compatible with the RAC400?
Yes, this bulb is listed specifically for the Acto RAC400. If you have a different Acto model, its lamp will carry a different part number.
How long is the rated life on this bulb compared to typical projector lamps?
LMP-RAC400 is rated for 4,000 hours, which is on the longer side within this catalogue, where many bare bulbs are rated around 2,000 to 3,000 hours, meaning fewer replacements over the life of the projector.
Is the RAC400's cage part of the LMP-RAC400 order?
No, LMP-RAC400 is the bare bulb only. It fits into the housing already installed in your RAC400 rather than replacing the whole lamp cage, so keep that housing when removing the old bulb.
What wattage does the RAC400 lamp run at?
LMP-RAC400 runs at 215 watts, the figure Acto specifies for the RAC400's lamp. This wattage figure applies to the bare bulb only and is the same rating used for the complete module, where one is listed.
Do I need to reset a lamp counter on the RAC400 after fitting this bulb?
Many projectors in this class track lamp hours and prompt for a reset from the on-screen menu once a new bulb is fitted. Check the RAC400's lamp or service menu after installation to see whether a reset is needed.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Is LMP-RAC400 only compatible with the RAC400?
Yes, this bulb is listed specifically for the Acto RAC400. If you have a different Acto model, its lamp will carry a different part number.
How long is the rated life on this bulb compared to typical projector lamps?
LMP-RAC400 is rated for 4,000 hours, which is on the longer side within this catalogue, where many bare bulbs are rated around 2,000 to 3,000 hours, meaning fewer replacements over the life of the projector.
Is the RAC400's cage part of the LMP-RAC400 order?
No, LMP-RAC400 is the bare bulb only. It fits into the housing already installed in your RAC400 rather than replacing the whole lamp cage, so keep that housing when removing the old bulb.
What wattage does the RAC400 lamp run at?
LMP-RAC400 runs at 215 watts, the figure Acto specifies for the RAC400's lamp. This wattage figure applies to the bare bulb only and is the same rating used for the complete module, where one is listed.
Do I need to reset a lamp counter on the RAC400 after fitting this bulb?
Many projectors in this class track lamp hours and prompt for a reset from the on-screen menu once a new bulb is fitted. Check the RAC400's lamp or service menu after installation to see whether a reset is needed.
Other Acto lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
