PHOTO
LMP-E212 bare projector lamp
Fits 49 projector models from Sony.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
The bare LMP-E212 fits 49 of the same Sony EW, EX, SW, SX and F-series projectors as the module listing, running at 210 watts with about 3000 hours of rated life. The difference is that no housing or cage comes with it here.
A small number of models on the module listing, such as certain SW225, SW526 and SX225 variants, are not repeated on this bare listing, so check your exact model against the range below rather than assuming the two listings are identical. Choose bare only where your existing housing is still in working order.
At a glance
- Wattage — 210 W
- Rated life — 3,000 hours
- Type — Bare Projector Lamp
- SKU — LA-10405
- Compatibility — 49 projector models
Common questions
Why does the bare version list two fewer models than the module version?
Our records show 49 projectors against the bare LMP-E212, a few short of the 51 on the module listing, including differences around specific SW-series variants. Check your projector against the list on this page directly rather than the module listing.
What is included in this bare bulb listing?
Just the bulb itself; no housing, cage or connector is supplied. You fit it into the enclosure already inside your projector, so check that your existing cage and contacts are in good condition before ordering this version.
Which projector families does this bare lamp cover?
The Sony EW, EX, SW, SX and F-series models listed above, sharing the LMP-E212 lamp at 210 watts and roughly 3000 hours of rated life.
Can I switch to the bare version if I originally had a module fitted?
Yes, as long as the housing from that module, or your projector's original housing, is still intact and undamaged, a bare LMP-E212 bulb can be fitted into it.
Is there a risk in handling this bare lamp during fitting?
Projector bulbs of this type run under pressure and heat during use, so let the old lamp cool fully before removing it, and avoid touching the new bulb's glass with bare skin, since oils can shorten its life.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Why does the bare version list two fewer models than the module version?
Our records show 49 projectors against the bare LMP-E212, a few short of the 51 on the module listing, including differences around specific SW-series variants. Check your projector against the list on this page directly rather than the module listing.
What is included in this bare bulb listing?
Just the bulb itself; no housing, cage or connector is supplied. You fit it into the enclosure already inside your projector, so check that your existing cage and contacts are in good condition before ordering this version.
Which projector families does this bare lamp cover?
The Sony EW, EX, SW, SX and F-series models listed above, sharing the LMP-E212 lamp at 210 watts and roughly 3000 hours of rated life.
Can I switch to the bare version if I originally had a module fitted?
Yes, as long as the housing from that module, or your projector's original housing, is still intact and undamaged, a bare LMP-E212 bulb can be fitted into it.
Is there a risk in handling this bare lamp during fitting?
Projector bulbs of this type run under pressure and heat during use, so let the old lamp cool fully before removing it, and avoid touching the new bulb's glass with bare skin, since oils can shorten its life.
Other Sony lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
