PHOTO
L1809A bare projector lamp
Fits 4 projector models from HP.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
The L1809A is a bare projector lamp built for four HP projectors: the MP2210, MP2215, MP2220 and MP2225. It supplies just the bulb, rated at 156 watts with a 3000 hour service life, so your projector's original housing and reflector assembly stay in place. Order this version only if you already have a working housing to reuse.
L1809A is the only part number we hold for this bulb, so there are no alternative codes to weigh up here. Because it ships without a cage, fitting it means opening your existing module carefully and transferring the new burner across yourself. If you are not confident doing that, a housed module would be the easier route.
At a glance
- Wattage — 156 W
- Rated life — 3,000 hours
- Type — Bare Projector Lamp
- SKU — LA-09199
- Compatibility — 4 projector models
Common questions
Will the L1809A fit my HP MP2215 exactly?
Yes. The L1809A is listed for the HP MP2210, MP2215, MP2220 and MP2225, so it is the correct bulb for any of these four models without adaptation.
Is the L1809A delivered without its cage?
Yes, this listing is a bare projector lamp, meaning only the bulb is supplied. Your projector's existing housing, cage and connector stay in use, so you transfer the new bulb into the old housing yourself.
What is the rated life of the L1809A?
The L1809A carries a rated life of 3000 hours at its rated 156 watt output. Actual life varies with how the projector is used and how well it is ventilated.
Do I need any tools to fit a bare lamp?
You will normally need to open the existing lamp housing, which is usually held with a couple of screws, then swap the burner across before closing it up again. No specialist tools are required.
Does the L1809A go by any second reference?
No. We list this bulb under a single code, L1809A, so there is no alternative reference to check against when ordering. If your old lamp carries a different marking, check it carefully before assuming it is a match for this listing.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Will the L1809A fit my HP MP2215 exactly?
Yes. The L1809A is listed for the HP MP2210, MP2215, MP2220 and MP2225, so it is the correct bulb for any of these four models without adaptation.
Is the L1809A delivered without its cage?
Yes, this listing is a bare projector lamp, meaning only the bulb is supplied. Your projector's existing housing, cage and connector stay in use, so you transfer the new bulb into the old housing yourself.
What is the rated life of the L1809A?
The L1809A carries a rated life of 3000 hours at its rated 156 watt output. Actual life varies with how the projector is used and how well it is ventilated.
Do I need any tools to fit a bare lamp?
You will normally need to open the existing lamp housing, which is usually held with a couple of screws, then swap the burner across before closing it up again. No specialist tools are required.
Does the L1809A go by any second reference?
No. We list this bulb under a single code, L1809A, so there is no alternative reference to check against when ordering. If your old lamp carries a different marking, check it carefully before assuming it is a match for this listing.
Other HP lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
