PHOTO
DT01195 projector lamp with module
Fits 2 projector models from 3M.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
DT01195 is built for two closely related 3M projectors, the X21i and X26i, and is supplied as a complete lamp and housing module. It runs at 215 watts with a 3,000-hour rated life, which is on the longer side compared with older 3M lamps in this range.
You will also find this lamp listed as 78-6972-0106-5, an alternative code for the same module. Since only the X21i and X26i take this part, ordering is a matter of confirming your projector's model rather than matching a long list, and the module arrives ready to fit as one unit.
At a glance
- Wattage — 215 W
- Rated life — 3,000 hours
- Type — Projector Lamp with Module
- SKU — LA-07817
- Compatibility — 2 projector models
Common questions
Does DT01195 fit the 3M X26i as well as the X21i?
Yes, both are listed as compatible with DT01195. 3M appears to have used the same lamp and housing across this pair of models despite the different model names, so one part covers both projectors.
Is 78-6972-0106-5 a genuine 3M part number?
It is an alternative code recorded for this same lamp, alongside DT01195. Both numbers describe the identical module, so either one appearing on your projector's existing lamp or documentation confirms this is the correct replacement.
What does a 3,000-hour rating mean in practice?
It is the expected life of the bulb before brightness typically falls enough to notice, based on standard use. Running the projector for long daily sessions will use up those hours faster than occasional or short-session use.
Do I need to remove anything from my old lamp before fitting DT01195?
No, because this is the module version you are replacing the whole housed unit, not transferring a bulb between cages. Simply remove the old module and fit the new one in the same slot.
Should I reset the lamp timer on my X21i after this fit?
Yes, resetting the lamp hour counter through the projector's on-screen menu after fitting a new lamp keeps the remaining-life estimate accurate, rather than continuing to count from where the old, worn lamp left off.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Does DT01195 fit the 3M X26i as well as the X21i?
Yes, both are listed as compatible with DT01195. 3M appears to have used the same lamp and housing across this pair of models despite the different model names, so one part covers both projectors.
Is 78-6972-0106-5 a genuine 3M part number?
It is an alternative code recorded for this same lamp, alongside DT01195. Both numbers describe the identical module, so either one appearing on your projector's existing lamp or documentation confirms this is the correct replacement.
What does a 3,000-hour rating mean in practice?
It is the expected life of the bulb before brightness typically falls enough to notice, based on standard use. Running the projector for long daily sessions will use up those hours faster than occasional or short-session use.
Do I need to remove anything from my old lamp before fitting DT01195?
No, because this is the module version you are replacing the whole housed unit, not transferring a bulb between cages. Simply remove the old module and fit the new one in the same slot.
Should I reset the lamp timer on my X21i after this fit?
Yes, resetting the lamp hour counter through the projector's on-screen menu after fitting a new lamp keeps the remaining-life estimate accurate, rather than continuing to count from where the old, worn lamp left off.
Other 3M lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
