PHOTO
DT00181 projector lamp with module
Fits 3 projector models from Hitachi.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Rated at 150W with a quoted life of 2000 hours, DT00181 is a complete lamp and housing module for three Hitachi projectors: the CP-833W, CP-S833 and CP-S835. The whole assembly is replaced as a single unit, so there is no need to open the old housing.
DT00181 is also listed under CPS833LAMP, CPS835LAMP and DT00182, so if a code you have seen elsewhere does not match, check it against these before assuming it is a different lamp. Because this is a full module, ordering is a matter of confirming your projector is a CP-833W, CP-S833 or CP-S835 and fitting the whole unit in place of the old one.
At a glance
- Wattage — 150 W
- Rated life — 2,000 hours
- Type — Projector Lamp with Module
- SKU — LA-11915
- Compatibility — 3 projector models
Common questions
What other part numbers refer to the DT00181 lamp?
The same lamp is also listed as CPS833LAMP, CPS835LAMP and DT00182. These are alternative codes for the identical unit, not different products, so any of them should fit the CP-833W, CP-S833 or CP-S835 correctly.
What is the rated life of the DT00181 lamp?
DT00181 carries a quoted life of 2000 hours at its rated 150W output. Actual usable life depends on how the projector is used, but 2000 hours is the figure published for this lamp.
Which Hitachi projectors take DT00181?
DT00181 is fitted to the Hitachi CP-833W, CP-S833 and CP-S835. All three share the same lamp module, so one part number covers the full range; just check your projector's model plate matches one of the three.
Is DT00181 a bare bulb or a full module?
It is supplied as a complete module, with the 150W bulb already fitted inside its housing. You remove the entire old unit from your CP-833W, CP-S833 or CP-S835 and fit the entire new one in its place.
Which references prove the DT00181 matches my Hitachi CP-S835?
Match the model printed on your projector against CP-833W, CP-S833 or CP-S835, or check any existing lamp code against DT00181, CPS833LAMP, CPS835LAMP or DT00182. If any of these match, DT00181 is the correct order.
This is a complete module — bulb already seated in its housing, so it drops straight in.
What other part numbers refer to the DT00181 lamp?
The same lamp is also listed as CPS833LAMP, CPS835LAMP and DT00182. These are alternative codes for the identical unit, not different products, so any of them should fit the CP-833W, CP-S833 or CP-S835 correctly.
What is the rated life of the DT00181 lamp?
DT00181 carries a quoted life of 2000 hours at its rated 150W output. Actual usable life depends on how the projector is used, but 2000 hours is the figure published for this lamp.
Which Hitachi projectors take DT00181?
DT00181 is fitted to the Hitachi CP-833W, CP-S833 and CP-S835. All three share the same lamp module, so one part number covers the full range; just check your projector's model plate matches one of the three.
Is DT00181 a bare bulb or a full module?
It is supplied as a complete module, with the 150W bulb already fitted inside its housing. You remove the entire old unit from your CP-833W, CP-S833 or CP-S835 and fit the entire new one in its place.
Which references prove the DT00181 matches my Hitachi CP-S835?
Match the model printed on your projector against CP-833W, CP-S833 or CP-S835, or check any existing lamp code against DT00181, CPS833LAMP, CPS835LAMP or DT00182. If any of these match, DT00181 is the correct order.
Other Hitachi lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
