PHOTO
D4J03 projector lamp module
Fits 2 projector models from Dell.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
D4J03 is the module version of the lamp fitted to the Dell 1220, combining a 190-watt bulb with a new housing in one unit. It suits projectors where the existing housing has become brittle or damaged, since the whole assembly is replaced rather than just the bulb. Rated life is 5000 hours.
The same lamp also appears under the code 725-BBCV, which is the bare bulb version of this part rather than a different lamp. If your current housing is still sound, that bare bulb listing is the cheaper option, since it doesn't include a new housing you may not need.
At a glance
- Wattage — 190 W
- Rated life — 5,000 hours
- Type — Projector Lamp with Module
- SKU — LA-08724
- Compatibility — 2 projector models
Common questions
Why would I choose D4J03 over the bare 725-BBCV bulb?
Choose D4J03 if your current housing is cracked, has a broken mount or shows heat damage, since this listing replaces the housing along with the bulb. If the housing is fine, the bare bulb is the simpler option.
Does this module fit both the 1220 and 1220Dell listings?
Yes, both references point to the exact same Dell 1220 projector rather than two different models, and this module fits either way the unit happens to be labelled on its casing.
How long does fitting a module like this usually take?
Most Dell 1220 lamp bays are accessed through a panel on the top or side of the unit, and swapping a module typically takes a few minutes once the projector has cooled. No further calibration is usually needed afterwards.
What's the benefit of the housing coming pre-fitted?
It removes the step of prising the old bulb out of its housing and fitting a new one by hand, which can be fiddly and risks damaging the bulb's seal. The module simply swaps in as a complete unit.
Is 5000 hours a long rated life compared to other Dell lamps?
It's on the higher end for lamps in this range, since some Dell modules elsewhere are rated for noticeably fewer hours of use. The figure reflects this specific bulb's design rather than a general standard across every Dell projector.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Why would I choose D4J03 over the bare 725-BBCV bulb?
Choose D4J03 if your current housing is cracked, has a broken mount or shows heat damage, since this listing replaces the housing along with the bulb. If the housing is fine, the bare bulb is the simpler option.
Does this module fit both the 1220 and 1220Dell listings?
Yes, both references point to the exact same Dell 1220 projector rather than two different models, and this module fits either way the unit happens to be labelled on its casing.
How long does fitting a module like this usually take?
Most Dell 1220 lamp bays are accessed through a panel on the top or side of the unit, and swapping a module typically takes a few minutes once the projector has cooled. No further calibration is usually needed afterwards.
What's the benefit of the housing coming pre-fitted?
It removes the step of prising the old bulb out of its housing and fitting a new one by hand, which can be fiddly and risks damaging the bulb's seal. The module simply swaps in as a complete unit.
Is 5000 hours a long rated life compared to other Dell lamps?
It's on the higher end for lamps in this range, since some Dell modules elsewhere are rated for noticeably fewer hours of use. The figure reflects this specific bulb's design rather than a general standard across every Dell projector.
Other Dell lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
