PHOTO
BL-FS220A projector lamp with module
Fits 4 projector models from Optoma.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
The BL-FS220A is a complete lamp and housing built for the Optoma DP7259, EP770, EzPro 770 and TX770. Inside sits a 220 watt bulb rated for 2,000 hours of use, sealed into its own cage so the whole assembly slides straight into the projector without separate bulb handling.
Optoma has also listed this lamp under SP.86S01G.C01 and SP.86S01GC01 at different times, so check any of the three codes against your old unit before ordering; they describe one identical part. Because this is a module rather than a bare bulb, no cage or housing work is needed, and you simply remove the spent unit and fit this one in its place.
At a glance
- Wattage — 220 W
- Rated life — 2,000 hours
- Type — Projector Lamp with Module
- SKU — LA-09673
- Compatibility — 4 projector models
Common questions
Which Optoma projectors take the BL-FS220A?
The BL-FS220A fits the Optoma DP7259, EP770, EzPro 770 and TX770. All four models share the same lamp module, so one bought for any of them installs correctly in the others too.
Are SP.86S01G.C01 and BL-FS220A the same lamp?
Yes. SP.86S01G.C01 and SP.86S01GC01 are alternative codes for the identical BL-FS220A module. Different price lists and manuals use different codes for the same part, so any of the three references the correct lamp.
Does the lamp timer need resetting after fitting this?
These Optoma models typically prompt for a lamp reset in the on-screen menu once a fresh module is fitted, usually listed under lamp or maintenance settings. Resetting the counter keeps the hours display accurate for the new bulb.
Can I fit the BL-FS220A without a technician?
Yes. The lamp bay on the DP7259, EP770, EzPro 770 and TX770 is accessed from a panel on the case rather than by opening the whole unit. Power down, allow the projector to cool, then release the cover to swap the module.
What does the 220 watt rating tell me?
It is the power draw of the bulb fitted inside the BL-FS220A module, matching what these four Optoma projectors were built to run. It is not adjustable, so any replacement for this model should carry the same rating.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Which Optoma projectors take the BL-FS220A?
The BL-FS220A fits the Optoma DP7259, EP770, EzPro 770 and TX770. All four models share the same lamp module, so one bought for any of them installs correctly in the others too.
Are SP.86S01G.C01 and BL-FS220A the same lamp?
Yes. SP.86S01G.C01 and SP.86S01GC01 are alternative codes for the identical BL-FS220A module. Different price lists and manuals use different codes for the same part, so any of the three references the correct lamp.
Does the lamp timer need resetting after fitting this?
These Optoma models typically prompt for a lamp reset in the on-screen menu once a fresh module is fitted, usually listed under lamp or maintenance settings. Resetting the counter keeps the hours display accurate for the new bulb.
Can I fit the BL-FS220A without a technician?
Yes. The lamp bay on the DP7259, EP770, EzPro 770 and TX770 is accessed from a panel on the case rather than by opening the whole unit. Power down, allow the projector to cool, then release the cover to swap the module.
What does the 220 watt rating tell me?
It is the power draw of the bulb fitted inside the BL-FS220A module, matching what these four Optoma projectors were built to run. It is not adjustable, so any replacement for this model should carry the same rating.
Other Optoma lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
