PHOTO
BL-FP260B bare projector lamp
Fits 3 projector models from Optoma.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
The Optoma EP773, its EzPro 773 equivalent, and the TX773 all take this single 260 watt bulb, rated for 2,000 hours. This listing is the bare version, sold without a housing, so it's intended for fitting inside a lamp cage that's already in working order rather than replacing the whole assembly.
Optoma's own codes for this bulb are SP.86R01GC01 and, with a full stop, SP.86R01G.C01 - the same lamp under either number. A complete module version, with housing included, is also available separately if your current cage shows any damage; the bare bulb here is the more economical option when the housing itself is still sound.
At a glance
- Wattage — 260 W
- Rated life — 2,000 hours
- Type — Bare Projector Lamp
- SKU — LA-09735
- Compatibility — 3 projector models
Common questions
Is EzPro 773 a different lamp requirement to the EP773?
No, EzPro 773 is an alternative name for the same Optoma model and shares this identical BL-FP260B bulb with the EP773 and TX773 badges too.
Should I buy the bare bulb or the module for my TX773?
Choose the bare bulb if your existing housing is undamaged and you only need the bulb replaced; choose the module if the housing itself is cracked, scorched, or the connector is unreliable.
Are SP.86R01GC01 and SP.86R01G.C01 the same code?
Yes, the full stop is the only difference - both match this BL-FP260B bulb regardless of which one you happen to see printed on your old lamp.
How long is the BL-FP260B rated to last?
2,000 hours at 260 watts, with brightness typically fading as it approaches that figure rather than failing outright without any warning beforehand at all in most cases.
Do I need to reset anything on the EP773 after fitting a new bulb?
Yes, reset the lamp-hours counter through the projector's menu once the new bulb is installed, so the remaining-life estimate stays accurate going forward from that point.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Is EzPro 773 a different lamp requirement to the EP773?
No, EzPro 773 is an alternative name for the same Optoma model and shares this identical BL-FP260B bulb with the EP773 and TX773 badges too.
Should I buy the bare bulb or the module for my TX773?
Choose the bare bulb if your existing housing is undamaged and you only need the bulb replaced; choose the module if the housing itself is cracked, scorched, or the connector is unreliable.
Are SP.86R01GC01 and SP.86R01G.C01 the same code?
Yes, the full stop is the only difference - both match this BL-FP260B bulb regardless of which one you happen to see printed on your old lamp.
How long is the BL-FP260B rated to last?
2,000 hours at 260 watts, with brightness typically fading as it approaches that figure rather than failing outright without any warning beforehand at all in most cases.
Do I need to reset anything on the EP773 after fitting a new bulb?
Yes, reset the lamp-hours counter through the projector's menu once the new bulb is installed, so the remaining-life estimate stays accurate going forward from that point.
Other Optoma lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
