PHOTO
BL-FP250A Projector Lamp with Module
Fits 1 projector model from Optoma.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Built solely for the Optoma HD7100, BL-FP250A runs a 250-watt bulb rated for 3,000 hours. Unlike many Optoma lamps shared across several model ranges, this part is listed against a single projector, so anyone with an HD7100 can order it without checking a wider compatibility table first.
Only one code, BL-FP250A, is recorded for this lamp, with no alternate part numbers to check. It is supplied as a complete module - bulb and housing together - so fitting it means replacing the whole assembly in the HD7100 rather than swapping a bulb into the existing housing.
At a glance
- Wattage — 250 W
- Rated life — 3,000 hours
- Type — Projector Lamp with Module
- SKU — LA-10967
- Compatibility — 1 projector models
Common questions
Is BL-FP250A used on any other Optoma home cinema model besides the HD7100?
No, this record lists only the Optoma HD7100 as compatible, so this lamp is specific to that model rather than shared across Optoma's wider HD range of home cinema projectors.
How long should 3,000 hours last for typical home cinema use?
At roughly three hours of viewing most evenings, 3,000 rated hours works out to a little under three years, though actual life depends on brightness mode and how consistently the projector is used.
Do I need to reset a lamp counter on the HD7100 after fitting this module?
Most Optoma projectors, including the HD7100, track lamp hours internally, so check the on-screen menu for a lamp reset or maintenance option and run it once the new module is installed to clear any existing warning.
Is this a bare bulb or a full assembly?
It is a full module - the 250-watt bulb is already fitted into its housing, so you remove the old assembly as one piece and fit this one in its place without handling the bulb separately.
Are there other part numbers listed for this HD7100 lamp?
No, BL-FP250A is the only code recorded for this module, so there is no alternate number to look for on your existing lamp or in the HD7100 manual.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Is BL-FP250A used on any other Optoma home cinema model besides the HD7100?
No, this record lists only the Optoma HD7100 as compatible, so this lamp is specific to that model rather than shared across Optoma's wider HD range of home cinema projectors.
How long should 3,000 hours last for typical home cinema use?
At roughly three hours of viewing most evenings, 3,000 rated hours works out to a little under three years, though actual life depends on brightness mode and how consistently the projector is used.
Do I need to reset a lamp counter on the HD7100 after fitting this module?
Most Optoma projectors, including the HD7100, track lamp hours internally, so check the on-screen menu for a lamp reset or maintenance option and run it once the new module is installed to clear any existing warning.
Is this a bare bulb or a full assembly?
It is a full module - the 250-watt bulb is already fitted into its housing, so you remove the old assembly as one piece and fit this one in its place without handling the bulb separately.
Are there other part numbers listed for this HD7100 lamp?
No, BL-FP250A is the only code recorded for this module, so there is no alternate number to look for on your existing lamp or in the HD7100 manual.
Other Optoma lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
