PHOTO
AN-PH80LP bare projector lamp
Fits 9 projector models from Sharp.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
AN-PH80LP is also available as a bare bulb rather than a full module, for the same nine XG-PH80 projectors: XG-PH80W, XG-PH80W-N, XG-PH80WN, XG-PH80X, XG-PH80X-N, XG-PH80XA, XG-PH80XN, XG-PH80XW and XG-PH85WG. Choose this bare version if the housing fitted in your projector is still in good condition and only the bulb has failed.
No alternative part numbers are recorded for this lamp beyond AN-PH80LP itself, matching the module version. Because it is bare, handle it by the base rather than the glass during fitting, and let the projector cool fully first, since the lamp compartment on these installation models can retain heat for some time.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-10270
- Compatibility — 9 projector models
Common questions
What's the difference between this bare lamp and the AN-PH80LP module?
The bulb is identical in both. This bare version leaves your existing housing in place, while the separately listed module replaces the housing as well as the bulb.
Can I use this bare bulb in an XG-PH80XN?
Yes, the XG-PH80XN is one of the nine models this bare lamp is listed for, along with the wider XG-PH80W and XG-PH80X range, all of which share the same lamp engine.
How do I remove the old bulb without damaging the housing?
Follow the release mechanism described in your XG-PH80 manual, usually a latch or small screws, and lift the bulb straight out rather than twisting it, to avoid stressing the housing's contacts.
Does skin contact harm the glass of the AN-PH80LP?
It can. Skin oils on the glass can create hot spots once the lamp is powered on, so handle it by its base or use a clean cloth if the glass must be touched.
Does this bare lamp carry the same rating as the module version?
Watts and hours are not published for this model in either the bare or module listing, so both versions should be treated the same way when it comes to planning replacement timing.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
What's the difference between this bare lamp and the AN-PH80LP module?
The bulb is identical in both. This bare version leaves your existing housing in place, while the separately listed module replaces the housing as well as the bulb.
Can I use this bare bulb in an XG-PH80XN?
Yes, the XG-PH80XN is one of the nine models this bare lamp is listed for, along with the wider XG-PH80W and XG-PH80X range, all of which share the same lamp engine.
How do I remove the old bulb without damaging the housing?
Follow the release mechanism described in your XG-PH80 manual, usually a latch or small screws, and lift the bulb straight out rather than twisting it, to avoid stressing the housing's contacts.
Does skin contact harm the glass of the AN-PH80LP?
It can. Skin oils on the glass can create hot spots once the lamp is powered on, so handle it by its base or use a clean cloth if the glass must be touched.
Does this bare lamp carry the same rating as the module version?
Watts and hours are not published for this model in either the bare or module listing, so both versions should be treated the same way when it comes to planning replacement timing.
Other Sharp lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
