PHOTO
AH-55001 bare projector lamp
Fits 2 projector models from Eiki.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
The Eiki EIP-WX5000 and EIP-WX5000L share a single bare lamp, AH-55001, rated at 280 watts with a 3000-hour life. No alternative part codes are recorded for this bulb, so the one number is all you need when checking fit against your existing lamp or the label inside the projector.
As a bare lamp, AH-55001 replaces only the burner and reflector, so the housing from your EIP-WX5000 or EIP-WX5000L is reused rather than swapped out. Before fitting, compare the printed code on your old bulb against AH-55001, and allow the projector to cool fully first, since the lamp sits close to the main heat sink in this model.
At a glance
- Wattage — 280 W
- Rated life — 3,000 hours
- Type — Bare Projector Lamp
- SKU — LA-08918
- Compatibility — 2 projector models
Common questions
What is the wattage and rated life of AH-55001?
It is rated at 280 watts with a 3000-hour service life, fitted as standard to both the EIP-WX5000 and EIP-WX5000L. Actual bulb life depends on usage patterns, so treat this figure as a guide for planning replacements rather than an exact countdown.
Does AH-55001 fit projectors outside the EIP-WX5000 range?
No, our records show only the EIP-WX5000 and EIP-WX5000L against this code. If you have a different Eiki model, check its lamp compartment label for a separate part number rather than assuming this one fits.
Why are there no alternative part numbers listed for this lamp?
Some lamps are resold by several brands under different codes; this one is not. AH-55001 is the only number Eiki has attached to this bulb, so there is nothing else to cross-check it against.
What is the correct way to fit AH-55001 into the WX5000?
Power down and unplug the projector, let it cool, then open the lamp access panel with a screwdriver. Slide the old bulb out, fit the new one in the same orientation, and secure it before closing the panel.
Should I keep the old lamp after replacing it?
Many people keep a used lamp as a backup, since it may still produce a dimmer picture even after its rated life. Store it upright, away from moisture, until you are confident the new AH-55001 is working correctly.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
What is the wattage and rated life of AH-55001?
It is rated at 280 watts with a 3000-hour service life, fitted as standard to both the EIP-WX5000 and EIP-WX5000L. Actual bulb life depends on usage patterns, so treat this figure as a guide for planning replacements rather than an exact countdown.
Does AH-55001 fit projectors outside the EIP-WX5000 range?
No, our records show only the EIP-WX5000 and EIP-WX5000L against this code. If you have a different Eiki model, check its lamp compartment label for a separate part number rather than assuming this one fits.
Why are there no alternative part numbers listed for this lamp?
Some lamps are resold by several brands under different codes; this one is not. AH-55001 is the only number Eiki has attached to this bulb, so there is nothing else to cross-check it against.
What is the correct way to fit AH-55001 into the WX5000?
Power down and unplug the projector, let it cool, then open the lamp access panel with a screwdriver. Slide the old bulb out, fit the new one in the same orientation, and secure it before closing the panel.
Should I keep the old lamp after replacing it?
Many people keep a used lamp as a backup, since it may still produce a dimmer picture even after its rated life. Store it upright, away from moisture, until you are confident the new AH-55001 is working correctly.
Other Eiki lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
