PHOTO
7776 bare projector lamp
Fits 1 projector model from Kindermann.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Kindermann built the KX2500 around a single lamp code, 7776, and that is exactly what you get here: the bare bulb on its own, with no housing attached. It replaces a worn or failed lamp inside the projector's existing module, restoring brightness without the cost of a full assembly.
Because this is a bare bulb, you will need to transfer it into your current KX2500 housing rather than swap out a complete unit, so check that your existing module is undamaged before ordering. We list this lamp under code 7776; there is no separate module version bundled with this listing, only the bulb.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-09337
- Compatibility — 1 projector models
Common questions
Does the 7776 lamp come with a housing?
No. This listing is the bare bulb only, built to fit inside the housing already installed in your Kindermann KX2500. If your existing housing cage is cracked or the connector pins are damaged, you would need a module version instead of the bare lamp.
Which Kindermann projector uses the 7776 lamp?
The 7776 is listed against the Kindermann KX2500 only. If you are ordering for a different Kindermann model, check the code printed on your old lamp's housing or the projector's rating label before buying, since Kindermann use different lamp codes across their range.
How do I fit the bare 7776 bulb into my KX2500?
Power down the projector and let it cool fully before opening the lamp compartment. Remove the old bulb from its housing, transfer the new 7776 across using the same screws and connector orientation, then refit the housing into the projector before switching back on.
Is 7776 the only code for this Kindermann lamp?
In our listings this lamp is stocked under the single code 7776, with no alternative part numbers currently attached to the record. If your projector's label shows a different code entirely, it is worth double-checking against your KX2500 documentation before ordering.
Will I need to reset anything after replacing the lamp?
Most Kindermann projectors track lamp hours and will prompt a warning until the counter is cleared. After fitting the new 7776, open the projector's lamp or maintenance menu and reset the timer so the unit stops flagging the old bulb as expired.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Does the 7776 lamp come with a housing?
No. This listing is the bare bulb only, built to fit inside the housing already installed in your Kindermann KX2500. If your existing housing cage is cracked or the connector pins are damaged, you would need a module version instead of the bare lamp.
Which Kindermann projector uses the 7776 lamp?
The 7776 is listed against the Kindermann KX2500 only. If you are ordering for a different Kindermann model, check the code printed on your old lamp's housing or the projector's rating label before buying, since Kindermann use different lamp codes across their range.
How do I fit the bare 7776 bulb into my KX2500?
Power down the projector and let it cool fully before opening the lamp compartment. Remove the old bulb from its housing, transfer the new 7776 across using the same screws and connector orientation, then refit the housing into the projector before switching back on.
Is 7776 the only code for this Kindermann lamp?
In our listings this lamp is stocked under the single code 7776, with no alternative part numbers currently attached to the record. If your projector's label shows a different code entirely, it is worth double-checking against your KX2500 documentation before ordering.
Will I need to reset anything after replacing the lamp?
Most Kindermann projectors track lamp hours and will prompt a warning until the counter is cleared. After fitting the new 7776, open the projector's lamp or maintenance menu and reset the timer so the unit stops flagging the old bulb as expired.
Other Kindermann lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
