PHOTO
610-339-1700 bare projector lamp
Fits 5 projector models from Sanyo.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
Sanyo's LP-XW60, LP-XW60W and PLC-XW60, along with the PLC-XW1000C and PLC-XW1010C, all use the bare bulb listed here under 610-339-1700. Rather than supplying a new housing, this option lets you keep the cage already fitted inside your projector and simply renew the light source itself.
The same bulb is also catalogued as POA-LMP123, and both codes describe one physical part. Because it is sold bare, you will need to open your existing lamp cage and transfer this bulb into it, taking care with the electrical contacts at the base. If your housing shows cracks or discolouration rather than just a dim or failed bulb, a full module is the safer option.
At a glance
- Type — Bare Projector Lamp
- SKU — LA-10172
- Compatibility — 5 projector models
Common questions
Does the LP-XW60W use a different lamp to the standard LP-XW60?
No. The W suffix refers to a wireless variant of the projector, not a different lamp, so both models take the same bare bulb listed here.
Is 610-339-1700 the same lamp as POA-LMP123?
Yes, these are two codes for the identical bare bulb, one from Sanyo's numeric system and one from its POA reference range for this model.
Will this bare lamp fit the PLC-XW1000C as well as the PLC-XW60?
Yes. Sanyo built the XW60 and the XW1000C/XW1010C pair around the same lamp platform, so this bare bulb covers every one of these projector models without exception.
What should I check on my old housing before reusing it with a bare bulb?
Look for cracks in the reflector, discoloured plastic, or a burnt connector. If any of these are present, the housing itself may need replacing rather than just the bulb.
How do I avoid damaging a bare bulb during installation?
Hold it by its base or ceramic mount rather than the glass, and avoid touching the glass with bare skin, since oils can shorten its life once it heats up.
This is a bare lamp — the bulb only. You reuse the housing already fitted in your projector.
Does the LP-XW60W use a different lamp to the standard LP-XW60?
No. The W suffix refers to a wireless variant of the projector, not a different lamp, so both models take the same bare bulb listed here.
Is 610-339-1700 the same lamp as POA-LMP123?
Yes, these are two codes for the identical bare bulb, one from Sanyo's numeric system and one from its POA reference range for this model.
Will this bare lamp fit the PLC-XW1000C as well as the PLC-XW60?
Yes. Sanyo built the XW60 and the XW1000C/XW1010C pair around the same lamp platform, so this bare bulb covers every one of these projector models without exception.
What should I check on my old housing before reusing it with a bare bulb?
Look for cracks in the reflector, discoloured plastic, or a burnt connector. If any of these are present, the housing itself may need replacing rather than just the bulb.
How do I avoid damaging a bare bulb during installation?
Hold it by its base or ceramic mount rather than the glass, and avoid touching the glass with bare skin, since oils can shorten its life once it heats up.
Other Sanyo lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
