PHOTO
2002031-001 projector lamp with module
Fits 2 projector models from PolyVision · Steelcase.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
This is the module version of 2002031-001, built for the short-throw PJ905 projector that PolyVision and Steelcase both sold for whiteboard use. The lamp arrives already fitted inside its housing, so installation is a straight swap of the whole unit rather than handling a loose bulb, which suits anyone whose current housing is cracked, loose or missing parts.
Whether your PJ905 carries the PolyVision or Steelcase badge, the part you need is the same: 2002031-001. Buying the module instead of the bare lamp means the connector and reflector are replaced too, removing any doubt about whether the old housing is still making good contact. Shipping is free worldwide.
At a glance
- Type — Projector Lamp with Module
- SKU — LA-09994
- Compatibility — 2 projector models
Common questions
Why buy the module instead of the bare bulb for a PJ905?
The module is worth the extra cost if your existing housing is damaged, has a loose connector, or you'd rather not handle a bare bulb directly - it replaces the whole assembly in one go.
Does the branding, PolyVision or Steelcase, change which lamp fits?
No. Both names were used for the same PJ905 hardware, so 2002031-001 is correct either way - check the model number PJ905 rather than the brand printed on the case.
Is the short-throw design relevant to which lamp I need?
Not directly - the short-throw optics affect how the image is projected onto the whiteboard, but the lamp itself, 2002031-001, is specific to the PJ905 engine rather than the throw distance.
What's involved in fitting this module?
Open the lamp compartment, release the old module, and slide this one into its place before reconnecting it - no bulb handling or housing transfer is needed since it's supplied as one piece.
Does replacing the module affect the projector's whiteboard mounting bracket?
No, the lamp module sits inside the projector body only; the mounting bracket that positions the PJ905 relative to the whiteboard is a separate part and isn't affected by a lamp or module replacement.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Why buy the module instead of the bare bulb for a PJ905?
The module is worth the extra cost if your existing housing is damaged, has a loose connector, or you'd rather not handle a bare bulb directly - it replaces the whole assembly in one go.
Does the branding, PolyVision or Steelcase, change which lamp fits?
No. Both names were used for the same PJ905 hardware, so 2002031-001 is correct either way - check the model number PJ905 rather than the brand printed on the case.
Is the short-throw design relevant to which lamp I need?
Not directly - the short-throw optics affect how the image is projected onto the whiteboard, but the lamp itself, 2002031-001, is specific to the PJ905 engine rather than the throw distance.
What's involved in fitting this module?
Open the lamp compartment, release the old module, and slide this one into its place before reconnecting it - no bulb handling or housing transfer is needed since it's supplied as one piece.
Does replacing the module affect the projector's whiteboard mounting bracket?
No, the lamp module sits inside the projector body only; the mounting bracket that positions the PJ905 relative to the whiteboard is a separate part and isn't affected by a lamp or module replacement.
Other PolyVision lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
