PHOTO
1018740 projector lamp with module
Fits 2 projector models from Smartboard.
This is our reference price in US dollars. We confirm the delivered price for United Arab Emirates on a formal quote, including shipping, duties where we can prepay them, and the correct local warranty terms.
▣ Free worldwide shipping included
▣ 180-day guarantee
▣ Quotation valid 30 days
Typically 3–5 working days once the order is placed.
DUBAI
Sun-Thu 09:00-18:00 GST
This is the complete module version of the lamp used in the Smartboard UX80 and UX80HD, listed as part 1018740 and also known as ST38557. Housing and bulb arrive together as a single assembly, ready to replace the whole lamp unit rather than just the bulb. Choose it if your projector's current housing is worn or damaged.
Both the UX80 and its HD counterpart draw on the identical lamp module, so no separate part exists for the higher-resolution version. Fitting a module replaces the housing entirely, removing any need to inspect your old one for cracks or heat damage. If your housing is still sound, the same lamp is available bare under the code ST38557 instead, at a lower cost.
At a glance
- Type — Projector Lamp with Module
- SKU — LA-10318
- Compatibility — 2 projector models
Common questions
Should I order the module 1018740 or the bare ST38557?
Order the module if your UX80 or UX80HD's housing shows any cracking or wear; order the bare ST38557 if the housing is still in good condition.
Does the UX80HD need a different module to the standard UX80?
No, both models take the identical module listed here; the HD designation affects resolution, not the lamp hardware, so the same part number covers both projectors.
What comes included with this module that isn't in the bare version?
This module includes a complete housing along with the bulb; the bare version, ST38557, supplies the bulb and cage only, for fitting into your existing housing.
How long should fitting this module take?
Most owners can fit this module in a few minutes: power down the UX80, let it cool, release the lamp door, and swap the old module for this one.
Is it safe to run the UX80 immediately after fitting a new module?
Yes, once the lamp door is securely closed and latched, the projector can be powered on as normal; just allow it to warm up before judging brightness.
This is a complete module — bulb already seated in its housing, so it drops straight in.
Should I order the module 1018740 or the bare ST38557?
Order the module if your UX80 or UX80HD's housing shows any cracking or wear; order the bare ST38557 if the housing is still in good condition.
Does the UX80HD need a different module to the standard UX80?
No, both models take the identical module listed here; the HD designation affects resolution, not the lamp hardware, so the same part number covers both projectors.
What comes included with this module that isn't in the bare version?
This module includes a complete housing along with the bulb; the bare version, ST38557, supplies the bulb and cage only, for fitting into your existing housing.
How long should fitting this module take?
Most owners can fit this module in a few minutes: power down the UX80, let it cool, release the lamp door, and swap the old module for this one.
Is it safe to run the UX80 immediately after fitting a new module?
Yes, once the lamp door is securely closed and latched, the projector can be powered on as normal; just allow it to warm up before judging brightness.
Other Smartboard lamps in the catalogue. Codes in the same family often differ by a single character, so check the part number against your old lamp before ordering.
