Yamaha DPX-1 projector lamp
The Yamaha DPX-1 takes lamp 28-610 / 28-640, a 120 W lamp rated for 1,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Yamaha and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Yamaha DPX-1 take?
The Yamaha DPX-1 uses 28-610 / 28-640, also sold as Systems 28-610, Systems 28-640, Systems U2-150, Systems U2-151.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the DPX-1 lamp last?
28-610 is rated for 1,000 hours at 120 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Yamaha projectors?
We don't list another Yamaha model that shares this lamp.