Vivitek PJ905 projector lamp
The Vivitek PJ905 takes lamp 5811116517-S, a 220 W lamp rated for 5,000 hours. It comes as a complete module, with the bulb already fitted in its housing. The same lamp is also sold under 1 other part number, all listed below. It fits 3 Vivitek models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Vivitek PJ905.
| Code | Used by |
|---|---|
5811116517-S | Vivitek original part number |
5811116617-S | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Vivitek and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the PJ905, the same lamp is the correct part.
Which lamp does the Vivitek PJ905 take?
The Vivitek PJ905 uses 5811116517-S, also sold as 5811116617-S.
Should I buy the bare bulb or the module?
This model's lamp is sold as a complete module: the bulb comes fitted in its housing, so you replace the whole unit in one piece.
How long does the PJ905 lamp last?
5811116517-S is rated for 5,000 hours at 220 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Vivitek projectors?
Yes. The same lamp also fits the Vivitek D950HD, the Vivitek D951HD.