Viewsonic PJ1035-2 projector lamp
The Viewsonic PJ1035-2 takes lamp DT00205, a 150 W lamp rated for 1,500 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Viewsonic and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Viewsonic PJ1035-2 take?
The Viewsonic PJ1035-2 uses DT00205, also sold as 25.30025.011, 78-6969-8778-9, 78-6969-8920-7, RLU-150-03A, ZU0261 04 4010, ZU0261044010.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the PJ1035-2 lamp last?
DT00205 is rated for 1,500 hours at 150 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Viewsonic projectors?
Yes. The same lamp also fits the Viewsonic PJL855, the Viewsonic PJL1035.