Vidikron MODEL 40 projector lamp
The Vidikron MODEL 40 takes lamp VIPA-000100 / 151-1028-00 . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. The same lamp is also sold under 5 other part numbers, all listed below. It fits 4 Vidikron models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Vidikron MODEL 40.
| Code | Used by |
|---|---|
VIPA-000100 | Vidikron original part number |
151-1028-00 | Vidikron original part number |
151-1028-00 | Equivalent code |
RUPA 005400 | Equivalent code |
RUPA-005400 | Equivalent code |
RUPA005400 | Equivalent code |
VIPA-000100 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Vidikron and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the MODEL 40, the same lamp is the correct part.
Which lamp does the Vidikron MODEL 40 take?
The Vidikron MODEL 40 uses VIPA-000100 / 151-1028-00, also sold as 151-1028-00, RUPA 005400, RUPA-005400, RUPA005400, VIPA-000100.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the MODEL 40 lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Vidikron projectors?
Yes. The same lamp also fits the Vidikron MODEL 20, the Vidikron MODEL 20ET, the Vidikron MODEL 40ET.