Sony VPL-HW30ES SXRD projector lamp
The Sony VPL-HW30ES SXRD takes lamp LMP-H202, a 200 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Sony and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Sony VPL-HW30ES SXRD take?
The Sony VPL-HW30ES SXRD uses LMP-H202.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the VPL-HW30ES SXRD lamp last?
LMP-H202 is rated for 2,000 hours at 200 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Sony projectors?
Yes. The same lamp also fits the Sony HW30ES, the Sony HW40ES, the Sony HW50, the Sony HW50ES, the Sony HW55, the Sony HW55ES and other Sony models listed on this page.