Scott DLP 776 projector lamp
The Scott DLP 776 takes lamp VLT-X10LP / 60.J1610.001, a 150 W lamp rated for 1,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Scott and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Scott DLP 776 take?
The Scott DLP 776 uses VLT-X10LP / 60.J1610.001, also sold as 60.J1610.001, VLT-X10LP.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the DLP 776 lamp last?
VLT-X10LP is rated for 1,000 hours at 150 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Scott projectors?
We don't list another Scott model that shares this lamp.