Sanyo PLC-XT11 projector lamp
The Sanyo PLC-XT11 takes lamp 03-000712-01P / POA-LMP59, a 250 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Sanyo and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Sanyo PLC-XT11 take?
The Sanyo PLC-XT11 uses 03-000712-01P / POA-LMP59, also sold as 610 305 5602, 610-305-5602, LMP59, MP56T-930, POA-LMP59, 03-000712-01P.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the PLC-XT11 lamp last?
03-000712-01P is rated for 2,000 hours at 250 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Sanyo projectors?
Yes. The same lamp also fits the Sanyo DLP-380, the Sanyo ET-SLMP59, the Sanyo PLC-XT10(ChassisXT1001), the Sanyo PLC-XT10A, the Sanyo PLC-XT15A, the Sanyo PLC-XT15KA and other Sanyo models listed on this page.