Sanyo PLC-XP46L projector lamp
The Sanyo PLC-XP46L takes lamp POA-LMP47 / 03-000667-01P, a 275 W lamp rated for 1,500 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Sanyo and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Sanyo PLC-XP46L take?
The Sanyo PLC-XP46L uses POA-LMP47 / 03-000667-01P, also sold as 03-000667-01P, 610 297 3891, 610-297-3891, SP-LAMP-011, End Systems 03-000667-01P, End Systems 610 297 3891.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the PLC-XP46L lamp last?
POA-LMP47 is rated for 1,500 hours at 275 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Sanyo projectors?
Yes. The same lamp also fits the Sanyo 610 318 4821, the Sanyo 6103184821, the Sanyo ET-SLMP47, the Sanyo ET-SLMP87, the Sanyo LMP47, the Sanyo LMP87 and other Sanyo models listed on this page.