Runco Light Style LS3 projector lamp
The Runco Light Style LS3 takes lamp 997-5268-00, a 230 W lamp rated for 4,000 hours. It comes as a complete module, with the bulb already fitted in its housing. The same lamp is also sold under 1 other part number, all listed below. It fits 12 Runco models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Runco Light Style LS3.
| Code | Used by |
|---|---|
997-5268-00 | Runco original part number |
RUNCO-LS3-LAMP | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Runco and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the Light Style LS3, the same lamp is the correct part.
Which lamp does the Runco Light Style LS3 take?
The Runco Light Style LS3 uses 997-5268-00, also sold as RUNCO-LS3-LAMP.
Should I buy the bare bulb or the module?
This model's lamp is sold as a complete module: the bulb comes fitted in its housing, so you replace the whole unit in one piece.
How long does the Light Style LS3 lamp last?
997-5268-00 is rated for 4,000 hours at 230 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Runco projectors?
Yes. The same lamp also fits the Runco Light Style LS-1, the Runco Light Style LS-3, the Runco Light Style LS-5, the Runco Light Style LS-HB, the Runco Light Style LS-HB Ultra, the Runco LS-1 and other Runco models listed on this page.