Projection Design CINEO 80 1080 projector lamp
The Projection Design CINEO 80 1080 takes lamp Design R9801274 . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Projection and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Projection Design CINEO 80 1080 take?
The Projection Design CINEO 80 1080 uses Design R9801274, also sold as Design 400-0700-00.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Design CINEO 80 1080 lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Projection projectors?
Yes. The same lamp also fits the Projection Design Avielo Helios, the Projection Design Avielo Radiance RLS, the Projection Design AvieloHeliosStudioEdition, the Projection Design Cineo821080P, the Projection Design CINEO 80, the Projection Design F80 and other Projection models listed on this page.