Philips Pro Screen 4650B projector lamp
The Philips Pro Screen 4650B takes lamp LCA3106 . It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Philips and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Philips Pro Screen 4650B take?
The Philips Pro Screen 4650B uses LCA3106.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Pro Screen 4650B lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Philips projectors?
Yes. The same lamp also fits the Philips LC4650, the Philips LC4650/17, the Philips LC4650/40, the Philips LC4650B, the Philips LC4650G, the Philips LC4650G199 and other Philips models listed on this page.