Philips LC4031 projector lamp
The Philips LC4031 takes lamp LCA3107, a 120 W lamp rated for 4,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Philips and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Philips LC4031 take?
The Philips LC4031 uses LCA3107.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the LC4031 lamp last?
LCA3107 is rated for 4,000 hours at 120 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Philips projectors?
Yes. The same lamp also fits the Philips Hopper 10 series SV10, the Philips Hopper 10 series XG10, the Philips Hopper SV10, the Philips Hopper SV15, the Philips Hopper XG10, the Philips LC4031/17 and other Philips models listed on this page.