Optoma EzPro 739 projector lamp
The Optoma EzPro 739 takes lamp 25169089 . It comes as a complete module, with the bulb already fitted in its housing. The same lamp is also sold under 7 other part numbers, all listed below. It fits 13 Optoma models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Optoma EzPro 739.
| Code | Used by |
|---|---|
25169089 | Optoma original part number |
EC.J0601.001 | Equivalent code |
Vision 25169089 | Equivalent code |
Vision BL-FS200B | Equivalent code |
Vision SLP507 | Equivalent code |
Vision SP.80N01.001 | Equivalent code |
SP.80N01.009 | Equivalent code |
SP.80N01001 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Optoma and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the EzPro 739, the same lamp is the correct part.
Which lamp does the Optoma EzPro 739 take?
The Optoma EzPro 739 uses 25169089, also sold as EC.J0601.001, Vision 25169089, Vision BL-FS200B, Vision SLP507, Vision SP.80N01.001, SP.80N01.009.
Should I buy the bare bulb or the module?
This model's lamp is sold as a complete module: the bulb comes fitted in its housing, so you replace the whole unit in one piece.
How long does the EzPro 739 lamp last?
Rated life depends on the lamp mode you run and how the projector is ventilated; the lamp's own page lists the figure where the manufacturer publishes one.
Does the same lamp fit other Optoma projectors?
Yes. The same lamp also fits the Optoma EP738p, the Optoma EP739, the Optoma EP739H, the Optoma EP739X, the Optoma EP745, the Optoma EZPRO739 and other Optoma models listed on this page.