Optoma EzPro 72H projector lamp
The Optoma EzPro 72H takes lamp EC.J0401.002 / BL-FP200A, a 200 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. The same lamp is also sold under 3 other part numbers, all listed below. It fits 6 Optoma models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Optoma EzPro 72H.
| Code | Used by |
|---|---|
EC.J0401.002 | Optoma original part number |
BL-FP200A | Optoma original part number |
BL-FP200A | Equivalent code |
SP.80Y01.001 | Equivalent code |
EC.J0401.002 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Optoma and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the EzPro 72H, the same lamp is the correct part.
Which lamp does the Optoma EzPro 72H take?
The Optoma EzPro 72H uses EC.J0401.002 / BL-FP200A, also sold as BL-FP200A, SP.80Y01.001, EC.J0401.002.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the EzPro 72H lamp last?
EC.J0401.002 is rated for 2,000 hours at 200 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Optoma projectors?
Yes. The same lamp also fits the Optoma EP72H, the Optoma EP738, the Optoma EP741, the Optoma EzPro 738, the Optoma EzPro 741.