Mitsubishi XD211U projector lamp
The Mitsubishi XD211U takes lamp VLT-XD210LP, a 180 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. It fits 10 Mitsubishi models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Mitsubishi XD211U.
| Code | Used by |
|---|---|
VLT-XD210LP | Mitsubishi original part number |
The code printed on your old lamp or its housing should match one of the codes listed above. Mitsubishi and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the XD211U, the same lamp is the correct part.
Which lamp does the Mitsubishi XD211U take?
The Mitsubishi XD211U uses VLT-XD210LP.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the XD211U lamp last?
VLT-XD210LP is rated for 2,000 hours at 180 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Mitsubishi projectors?
Yes. The same lamp also fits the Mitsubishi GX-312, the Mitsubishi GX-314, the Mitsubishi LVP-SD210, the Mitsubishi LVP-XD211, the Mitsubishi LVP-XD211U, the Mitsubishi MD-311X and other Mitsubishi models listed on this page.