Mitsubishi LVP-SD206 projector lamp
The Mitsubishi LVP-SD206 takes lamp VLT-XD206LP, a 205 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Mitsubishi and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Mitsubishi LVP-SD206 take?
The Mitsubishi LVP-SD206 uses VLT-XD206LP.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the LVP-SD206 lamp last?
VLT-XD206LP is rated for 2,000 hours at 205 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Mitsubishi projectors?
Yes. The same lamp also fits the Mitsubishi LVP-XD206, the Mitsubishi MD-307S, the Mitsubishi MD-307X, the Mitsubishi SD206U, the Mitsubishi XD206U.