Lightware PLUS U3-1100SF projector lamp
The Lightware PLUS U3-1100SF takes lamp L129, a 130 W lamp rated for 1,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Lightware and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Lightware PLUS U3-1100SF take?
The Lightware PLUS U3-1100SF uses L129, also sold as 28-390, LCA3113, LCA3119, LMP-M130, U3-130, VLT-X30LP.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the PLUS U3-1100SF lamp last?
L129 is rated for 1,000 hours at 130 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Lightware projectors?
Yes. The same lamp also fits the Lightware Legend LS-8, the Lightware Legend LX-8, the Lightware PLUS U3-810SF, the Lightware U3-130.