Infocus RP-10S projector lamp
The Infocus RP-10S takes lamp 456-222 / 21139, a 132 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Infocus and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Infocus RP-10S take?
The Infocus RP-10S uses 456-222 / 21139, also sold as 21139, 420059, SP-LAMP-LP2E, XP60M-930, 60248940, Europe 21139.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the RP-10S lamp last?
456-222 is rated for 2,000 hours at 132 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Infocus projectors?
Yes. The same lamp also fits the Infocus C20, the Infocus C60, the Infocus LP210, the Infocus LP280, the Infocus LP290, the Infocus RP-10X.