HP VP6328 projector lamp
The HP VP6328 takes lamp L1695A, a 210 W lamp rated for 4,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. HP and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the HP VP6328 take?
The HP VP6328 uses L1695A.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the VP6328 lamp last?
L1695A is rated for 4,000 hours at 210 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other HP projectors?
Yes. The same lamp also fits the HP VP6300, the HP VP6310, the HP VP6310b, the HP VP6310c, the HP VP6311, the HP VP6312 and other HP models listed on this page.