Epson Powerlite S1 projector lamp
The Epson Powerlite S1 takes lamp ELPLP25 / V13H010L25, a 130 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Epson and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Epson Powerlite S1 take?
The Epson Powerlite S1 uses ELPLP25 / V13H010L25, also sold as V13H010L25, ELPLP25, V11H128020.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Powerlite S1 lamp last?
ELPLP25 is rated for 2,000 hours at 130 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Epson projectors?
Yes. The same lamp also fits the Epson EMP-S1, the Epson EMP-S1SP, the Epson EMP-S1SS, the Epson EMP-TW10, the Epson V11H128020.