Epson Powerlite 6100i projector lamp
The Epson Powerlite 6100i takes lamp ELPLP37, a 230 W lamp rated for 2,500 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Epson and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Epson Powerlite 6100i take?
The Epson Powerlite 6100i uses ELPLP37, also sold as V13H010L37.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the Powerlite 6100i lamp last?
ELPLP37 is rated for 2,500 hours at 230 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Epson projectors?
Yes. The same lamp also fits the Epson EMP-6000, the Epson EMP-6100, the Epson Powerlite 6000, the Epson Powerlite 6100.