§ Projector model · Epson

Epson PowerLite 1880 projector lamp

The Epson PowerLite 1880 takes lamp ELPLP64, a 275 W lamp rated for 3,000 hours. It comes as a complete module, with the bulb already fitted in its housing. The same lamp is also sold under 1 other part number, all listed below. It fits 25 Epson models in total.

The lamp that fits
ELPLP64 lamp with housing for the Epson PowerLite 1880
LA-09008 · LAMP WITH HOUSING
ELPLP64 projector lamp with module
275 W3,000 hLamp with housingFits 31 models
Primary code: ELPLP64
Price on request
Delivered price confirmed within one business hour
GET PRICEFull lamp details →
Every code this lamp is sold under

The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Epson PowerLite 1880.

CodeUsed by
ELPLP64Epson original part number
V13H010L64Equivalent code
Check the code before you order

The code printed on your old lamp or its housing should match one of the codes listed above. Epson and third-party suppliers sell the same lamp under several numbers.

Not sure it's your model?

The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.

Projectors this lamp also fits — 24 other Epson models

If your projector is one of these rather than the PowerLite 1880, the same lamp is the correct part.

Epson D6155W lampEpson D6250 lampEpson EB-935W lampEpson EB-1840W lampEpson EB-1850W lampEpson EB-1860 lampEpson EB-1870 lampEpson EB-1880 lampEpson EB-C700W lampEpson EB-C705W lampEpson EB-C710X lampEpson EB-C713X lampEpson EB-C715X lampEpson EB-C720XN lampEpson EB-C1030WN lampEpson EB-C1040XN lampEpson EB-D615W lampEpson EB-D6155W lampEpson EB-D6250 lampEpson H425A lampEpson H451A lampEpson PowerLite 935W lampEpson PowerLite 1850W lampEpson Powerlite D6155W lamp
Common questions

Which lamp does the Epson PowerLite 1880 take?

The Epson PowerLite 1880 uses ELPLP64, also sold as V13H010L64.

Should I buy the bare bulb or the module?

This model's lamp is sold as a complete module: the bulb comes fitted in its housing, so you replace the whole unit in one piece.

How long does the PowerLite 1880 lamp last?

ELPLP64 is rated for 3,000 hours at 275 W. Actual life depends on the lamp mode you run and how the projector is ventilated.

Does the same lamp fit other Epson projectors?

Yes. The same lamp also fits the Epson D6155W, the Epson D6250, the Epson EB-935W, the Epson EB-1840W, the Epson EB-1850W, the Epson EB-1860 and other Epson models listed on this page.

All Epson projector lamps →All Epson projector models A–Z →
The Epson PowerLite 1880 lamp at a glance
Lamp
ELPLP64
Replacing the lamp in the Epson PowerLite 1880
  1. Turn the projector off and unplug the power cord.
  2. Let the lamp cool for at least one hour before handling it.
  3. Loosen the lamp cover screw with the screwdriver supplied with the new lamp, then slide the cover out and lift it off.
  4. Loosen the screws holding the lamp in place (they stay captive and do not come fully out).
  5. Raise the lamp handle and ease the lamp out; if it has broken, watch for loose glass fragments in the lamp bay.
  6. Slide the new lamp in gently without touching any of its glass, push it firmly home and tighten its screws.
  7. Refit the lamp cover and tighten its screw; the lamp will not light unless the cover is properly installed.
  8. The old lamp contains mercury, so recycle it per local rules rather than putting it in the trash.
Steps summarised from Epson's manual for the PowerLite 1880: source.
Then reset the lamp timer

Until you reset it, the PowerLite 1880 keeps counting from the old lamp's hours and will warn that the new lamp is expiring.

Menu → Reset → Reset Lamp Hours → Yes
Menu path from Epson's manual: source.