Epson EMP-835P projector lamp
The Epson EMP-835P takes lamp ELPLP31, a 200 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing.
The code printed on your old lamp or its housing should match one of the codes listed above. Epson and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
Which lamp does the Epson EMP-835P take?
The Epson EMP-835P uses ELPLP31, also sold as V13H010L31, V11H145020, V11H146020.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the EMP-835P lamp last?
ELPLP31 is rated for 2,000 hours at 200 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Epson projectors?
Yes. The same lamp also fits the Epson EMP-830, the Epson EMP-830P, the Epson EMP-835, the Epson Powerlite 830, the Epson Powerlite 830P, the Epson Powerlite 835 and other Epson models listed on this page.