Epson ELP-5300L projector lamp
The Epson ELP-5300L takes lamp ELPLP05, a 150 W lamp rated for 2,000 hours. It is available both as a complete module (bulb fitted in its housing) and as a bare bulb for re-using your existing housing. The same lamp is also sold under 3 other part numbers, all listed below. It fits 24 Epson models in total.
The code moulded into your old lamp or printed on its housing may be any of these. They are the same part. If the code on your lamp appears in this table, it fits the Epson ELP-5300L.
| Code | Used by |
|---|---|
ELPLP05 | Epson original part number |
ELPLP09 | Equivalent code |
V13H010L05 | Equivalent code |
V13H010L09 | Equivalent code |
The code printed on your old lamp or its housing should match one of the codes listed above. Epson and third-party suppliers sell the same lamp under several numbers.
The model number is on a label on the base or rear of the projector, and in the on-screen menu under Information. Still unsure? Send a photo of the old lamp and we'll confirm the match.
If your projector is one of these rather than the ELP-5300L, the same lamp is the correct part.
Which lamp does the Epson ELP-5300L take?
The Epson ELP-5300L uses ELPLP05, also sold as ELPLP09, V13H010L05, V13H010L09.
Should I buy the bare bulb or the module?
Both are available. The module is the bulb already fitted in its housing and is the quicker swap. The bare bulb is cheaper and re-uses your existing housing, but you move the bulb across yourself.
How long does the ELP-5300L lamp last?
ELPLP05 is rated for 2,000 hours at 150 W. Actual life depends on the lamp mode you run and how the projector is ventilated.
Does the same lamp fit other Epson projectors?
Yes. The same lamp also fits the Epson ELP-5300, the Epson ELP-5350, the Epson ELP-5350L, the Epson ELP-7200, the Epson ELP-7200L, the Epson ELP-7250 and other Epson models listed on this page.